Showing 49–64 of 108 results

  • 48VDC 100A DUAL FEED GMT FUSE PANEL, 15A GMT

    48VDC 100A DUAL-FEED GMT FUSE PANEL, 15A GMT

  • KLM FUSE PANELS DUAL FEED 100A

    100A DUAL-FEED KLM FUSE PANELS

  • LT-22222-L-AU915 The Dragino LT series I/O Modules are Long Range LoRa I/O Controller. It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and digital output etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring. The LT I/O Controllers allows user to send data and reach extremely long ranges. Item […]

    LORAWAN I/O CONTROLLER IOT

  • KIT OMNI 915/923 MHZ 6 DBI KERLINK ANTENNA Vertical omnidirectional outdoor antenna – 6dBi The antenna benefits from light weight, protection against short DC lightning strikes and can work in all conditions, such as strong wind resistance, and is resistant to water (IP66K). Supplied with mast mounting brackets […]

    ANTENNA KIT OMNI 915/923 MHZ 6 DBI

  • The ACCIOT-RSP02 protector is designed to protect equipment connected to the POE++ (Power Over Ethernet) Ethernet network against transient surges. It is installed on a network whose data transmission speed can reach 1000 Mbps. The protector is equipped with shielded RJ45 connectors. ● POE++ protection for indoor use ● Gigabit Ethernet (Cat.5E) ● Shielded RJ45 connectors […]

    POE SURGE PROTECTION – INDOOR

  • The ACCIOT-RSP01 protector is a 'Quarter Wave' type maintenance-free device with N connector that allows protection with very low residual voltages to be achieved.

    RF SURGE PROTECTION – LORA

  • (1 port, 30W, IEEE 802.3at, indoor PoE midspan) The single port PoE midspan provides up to 30 Watts of power over Ethernet and offers an IEEE 802.3at-compliant solution for remote powering of current and emerging high power applications. The PD-9001GR/SP provides optimal surge protection functionality for the installation of outdoor PDs. The midspan enables remote […]

    POE INJECTOR 30 W INDOOR – AC INPUT – US

  • The Wirnet iBTS IoT gateway is a robust, performant and highly scalable outdoor LoRaWAN gateway for smart IoT network. Its carrier-grade conception offers powerful embedded processing capabilities, secure design, advanced remote monitoring options, and enhanced radio network configuration, easy to operate even for non-telecom users. Already widely deployed worldwide to power tier one operators' networks, it is available in most global unlicensed frequency […]

    WIRNET IBTS 923MHZ

  • WIRNET ISTATION GATEWAY 923 MHZ PDTIOT-ISS06 KERLINK The “Wirnet iStation” is the evolution of the Wirnet Station. It is the ideal gateway to support your smart city, smart industry or any other smart project, combining simplicity of installation, unique superior coverage and operational excellence. The “Wirnet iStation” is a gate […]

    WIRNET ISTATION 923 MHZ

  • The Wirnet iFemtoCell is a smart, configurable and performant indoor LoRaWAN gateway for smart IoT network. Based on LoRa® technology, this gateway is perfectly designed for indoor public network extension (additional coverage in buildings to densify public network availability and continuity of service) or for ad-hoc indoor private coverage, like manufacturing, logistics or industrial sites requiring continuous connectivity for their IoT applications. Available in most global […]

    WIRNET IFEMTOCELL 923 MHZ

  • Closet connector housings (CCHs) provide interconnect or cross-connect capabilities between outside plant, riser or distribution cables and opto-electronics. Like other LANscape hardware solutions, the housings accept CCH connector panels. In addition, the housings accept CCH cassettes and CCH modules. From fiber and cable routing and strain relief, to port labeling and termination, these housings reduce […]

    CLOSET CONN HOUSING, 2U (F/4 PANELS)

  • 6 FOOT LENGTH GUTTER: 4X4 6 FOOT SOLID CHANNEL – WAVETRAX 4″ Four-inch WaveTrax Horizontal Trough comes in standard six-foot lengths. The trough can easily be cut to fit your network's specific application. As a general rule of thumb, support the fiber trough every three to five feet with a bracket either at […]

    6 FOOT LENGTH CHANNEL: 4X4 6 FOOT SOLID CHANNEL – WAVETRAX 4″

  • FUSE 15A GMT ROHS Ideal for power distribution to LEDs in connectivity panels, low-amp network elements, and other traditional equipment, GMT fuses provide fast-acting DC power circuit protection up to 20A.

    FUSE 15A GMT ROHS

  • Amphenol Network Solutions 100A dual-feed 10/10-position GMT fuse panel features universal ± 24/-48 operating voltage to fit in legacy and “next-gen” network applications, with advanced features engineered into a standard 1 RU footprint. Panels handle up to 20A fuses in each position, providing ample capacity for distribution to a broad range of components. Front panel features […]

    DUAL-FEED FRONT ACCESS GMT FUSE PANEL, 100A MAX,DUAL 10/10 20A GMT,STUD/SCREW

  • Amphenol Network Solutions' nrg600BT08-M 600A dual-feed 8/8 circuit breaker/TFD Load Center with 5 GMTs features -48V operating voltage to fit in legacy and “next-gen” network applications. The advanced circuit level monitoring is engineered into a 4 RU footprint. The panel provides full front access to fuses and LED status.

    NGRSMART 600A MINI BDFB- 8/8 CIRCUIT BREAKER WITH 5 GMTS

  • The Amphenol Network Solutions nrgBDFB-XLW 1000A Battery Distribution Fuse Bay includes up to eight panels per bay with each panel supporting a single feed with a maximum input rating of 1000A. Each panel contains 20 circuit positions for either bullet-style breakers or TFD fuse holders and features -48V operating voltage to fit in legacy and next-generation […]

    NGR BDFB-XLW BATTERY DISTRIBUTION FUSE BAY