027-2000-4090
Amphenol Telect's four-inch CableLinks to WaveTrax Adapter is an ideal transition for routing your fiber cables from WaveTrax Fiber Channel to our articulating CableLinks.
CableLinks allow you to safely negotiate through tight obstacles or changes in elevation. The adapter requires our Coupling Kit (Part No. 027-2000-4099) to connect to four-inch channel.
CableLinks easily connect to the adapter with the included hardware.
027-1000-4474 The four-inch 90-degree Up Elbow Cover quickly snaps onto the Up Elbow to protect fiber cables when transitioning from a horizontal cable run to a vertical cable run. The Cover snaps onto the Up Elbow without any special tools or additional hardware. The snap-together WaveTrax raceway system from Amphenol Network Solutions reduces time […]
027-200-4008 The WaveTrax four-inch End Cap attaches to the end of a fiber through transition. The End Cap provides closure at the end of a horizontal run and is attached directly onto fiber trough for easy installation. The snap-together WaveTrax overhead cable raceway system from Amphenol Network Solutions reduces time spent on installations and […]
027-2000-4024 The 90-degree Horizontal Elbow makes a left or right turn in a four-inch fiber raceway system. Each side of the Elbow requires a coupling kit, end cap or drop attachment.
027-1000-4488 The WaveTrax 45-inch four-inch drop elbow allows you to easily route your fiber cables at a lower elevation in your fiber channel. The down elbow is often used to route obstacles or obstacles in a horizontal cable run, while maintaining the bend radius […]
Valoraciones
No hay valoraciones aún.